DELI ELECTRONICS TECHNOLOGY CO.,LTD
Electronic Component Warehouse!
Add to Cart
BGY33 VHF power amplifier modules 80-108mHZ Modol operation CW 12.5V 100mW 50Ohm
High frequency tube radio frequency tube microwave tube RF management communication module
VHF POWER AMPLIFIER MODULES
A range of broadband amplifier modules designed for mobile communications equipments,
operating directly from 12 V vehicle electrical systems.
The devices will produce 18 W output into a 50 8 load.
The modules consist of a two stage RF amplifier using npn transistor chips,
together with lumped-element matching components.
Mounting and soldering recommendations
To ensure good thermal transfer the module should be mounted using heatink compound
onto a heatsink with a flat surface; if an isolation washer is used heatsink compound should be used on
both sides of the insulator. Burrs and thickening of the holes in the heatsink should be removed
and 3 mm bolts tightened to torques of 0,5 Nm minimum.
Devices may be soldered directly into a circuit with a soldering iron
at maximum iron temperature of 245 oc for 10 seconds at least 1 mm from the plastic.
Deli electronics tehcnology Co.,Ltd
Email:sales3@deli-ic.com
Skype:hkdeli881
Contact: VIVI-CHEN