E6B2-CWZ6C General-purpose Encoder Incremental 40-mm-dia. Rotary Encoder
General-purpose Encoder with External Diameter of 40 mm
• Incremental model
• External diameter of 40 mm.
• Resolution of up to 2,000 ppr.
*1. An inrush current of approximately 9 A will flow for approximately 0.3 ms when the power is turned ON.
*2. The line driver output is a data transmission circuit compatible with RS-422A
and long-distance transmission is possible with a twisted-pair cable. The quality is equivalent to AM26LS31.
*3. The maximum electrical response speed is determined by the resolution and maximum response frequency as follows:
This means that the E6B2-C Rotary Encoder will not operate electrically if its speed exceeds the maximum electrical response speed.
● Mounting
• Origin Indication
It is easy to adjust the position of phase Z with the origin indication function.
The following illustration shows the relationship between
phase Z and the origin. Set cut face D to the phase Z origin as shown in the illustration.
• Do not extend the length of the cable to more than 2 m. If the cable
must be more than 2 m, use a Model with a Line-driver Output (max. length: 100 m).
● Wiring
Spurious pulses may be generated when power is turned ON and
OFF. Wait at least 0.1 s after turning ON the power to the Encoder
before using the connected device, and stop using the connected
device at least 0.1 s before turning OFF the power to the Encoder.
Also, turn ON the power to the load only after turning ON the power to the Encoder.
Deli electronics tehcnology Co.,Ltd
Email:sales3@deli-ic.com
Skype:hkdeli881
Contact: VIVI-CHEN
