BZT52C5V6 410 mW Zener Diodes 2.4 to 39 Volts SOD123 VISHAY Original USA
BZT52C2V4
THRU
BZT52C39
Features
l Planar Die construction
l 410mW Power Dissipation
l Zener Voltages from 2.4V - 39V
l Ideally Suited for Automated Assembly Processes
Mechanical Data
l Case: SOD-123 Molded Plastic
l Terminals: Solderable per MIL-STD-202, Method 208
l Approx. Weight: 0.008 gram
l Mounting Position: Any
l Storage & Operating Junction Temperature: -55oC to +150oC
NOTES:
A. Mounted on 5.0mm2(.013mm thick) and areas.
B. Measured on 8.3ms, single half sine-wave or equivalent Current (Notes B)
square wave, duty cycle = 4 pulses per minute maximum.
1.Tolerance and Type Number Designation. The type numbers listed have a standard tolerance on the nominal zener voltage of ±5%.
2.Specials Available Include:
A. Nominal zener voltages between the voltages shown and tighter voltage tolerances.
B. Matched sets.
3.Zener Voltage (VZ) Measurement. Guarantees the zener voltage when measured at 90 seconds
while maintaining the lead temperature (TL) at 30OC, from the diode body.
4.Zener Impedance (ZZ) Derivation. The zener impedance is derived from the 60 cycle ac voltage, which results
when an AC current having an rms value equal to 10% of the dc zener current (IZT or IZK) is superimposed on IZT or IZK.
5.Surge Current (IR) Non-Repetitive. The rating listed in the electrical characteristics table is maximum peak,
non-repetitive, reverse surge current of 1/2 square wave or equivalent sine
wave pulse of 1/120 second duration superimposed on the test current, IZT, per JEDEC registration;
however, actual device capability is as described in Figure 5.
Deli electronics tehcnology Co.,Ltd
Email:sales3@deli-ic.com
Skype:hkdeli881
Contact: VIVI-CHEN
